Bakrol, Ahmedabad, Gujarat
GST No. 24BHRPR1728R1ZG
Construction Equipment
Providing you the best range of tmt bar bending machine, gw 42 bar bending machine, walk behind roller, concrete vibratior, concrete vibretor niddle shaft and temping rammer with effective & timely delivery.Tmt Bar Bending Machine
-
-
-
- +2
Approx. Rs 70,000 / UnitGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Unit |
| Automation Grade | Semi Automatic |
| Model Name/Number | 55 |
| Max Bending Angle | 135 degree |
| Brand | Boltrack |
| Bending Capacity | 40 mm TMT |
| Net Weight | 380 Kg |
| Operating Type | Automatic |
| Working Speed | 12 RPM |
| Motor Power | 7.5 HP |
| Input Voltage | 415 V, Three Phase |
1. Boltrack Bar bending machine comes with Planetary gearbox or Belt driven Planetary gearbox provide low maintenance and long life .Gear and gear shaft are made by high quality structural steel under heat treatment2. Electrical parts are SIEMENS & SCHNEIDER brand .3. Electrical circuit provide brake which eliminates need of brake motor thus, reducing break down and maintenance of changing brake liners4. Premium quality synthetic oil in these Planetary gear box which eliminates the frequent changes of oil and increase the life of gear components.6. Insert Pins that Placed the holes located around the turning table and the adjustable square steel.7. limit switch life cycle is 20 lakh times thus reducing breakdown give higher productivity.
Gw 42 Bar Bending Machine
-
-
-
- +1
Approx. Rs 60,000 / PieceGet Latest Price
Product BrochureProduct Details:| Automation Grade | Semi Automatic |
| Bar Dimensions | 850x740x820 |
| Model Name/Number | Gw42 |
| Max Bending Angle | 90 degree |
Its widely use at construction site for cut and bend rebar.best price product.
Walk Behind Roller
Approx. Rs 1.9 Lakh / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Piece |
| Engine Power | 13 HP |
| Brand | BOLTRACK ENGINEERS |
| Max Working Speed | 0-4 KM/HR |
| Speed Forward | FORWARD AND BACKWORD |
| Width Of Front Roll | 430 X 600 MM |
| Vibration Frequency | 70 HZ |
| Drive type | HYDRAULIC / ELECTRICAL |
| WEIGHT | 350 KG |
| SHOKING FORCE | 20 KN |
| Country of Origin | Made in India |
We can design and make all kinds of special Walk behind roller to suit for any conditions and to meet special requirements proposed by the customers.
Additional Information:
Concrete Vibratior
Approx. Rs 3,500 / PieceGet Latest Price
Product Details:| Capacity | 50 mm shaft |
| Weight | 1.5 kg |
| Diameter | 50mm |
| Phase Type | Singal phase |
| Material | Cast Iron |
| Vibrations per Minute | 4800 rpm |
| Size | 50mm |
We are engaged in offering a wide range of quality Products to our clients. Our range of all products is widely appreciated by our clients.
Concrete Vibretor Niddle Shaft
Approx. Rs 4,000 / PieceGet Latest Price
Product Details:| Capacity | 35/50 mm |
| Weight | 7 KG |
| Diameter | 50/35 mm |
| Phase Type | Single |
| Material | Mild Steel |
| Power | 5HP |
| Automation Grade | Automatic |
We are engaged in offering a wide range of quality Products to our clients. Our range of all products is widely appreciated by our clients.
Temping Rammer
Approx. Rs 35,100 / SetGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Set |
| Model Name/Number | HCR100 |
| Impacting Force | 10 KN |
| Automation Grade | Semi-Automatic |
| Is It Portable | Portable |
| Material | Carbon Steel, Hard Iron, Stainless Steel |
| Weight | 95 KG |
| I Deal In | New Only |
| JUMPING HEIGHT | 50 - 70 MM |
| ADVANCE SPEED | 10 - 13 M/MM |
| RAMMER PLATE SIZE | 250 X 335 MM |
| RATED POWER | 5.5 - 6.5 HP |
| Country of Origin | Made in India |
We can design and make all kinds of special Temping Rammer to suit for any conditions and to meet special requirements proposed by the customers.
Additional Information:
Explore More Products
Boltrack Engineers
Ahmedabad - 382433, Gujarat, India
© Boltrack Engineers. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited